Lexmark B2236dw: connect through the control panel

Lexmark B2236dw: connect through the control panel. Check the exact model and use these steps only where the stated requirements apply.

Before you begin

Applies to: Lexmark B2236dw. Only the listed models; do not expand by similarity.

Confirm the exact model and current printer status before changing settings.

Disconnect Ethernet when switching this printer to Wi-Fi.
Open Network/Ports > Network Overview > Active Adapter and choose Auto as documented.
Open Network/Ports > Wireless > Setup On Printer Panel.
Select the intended network and enter its credentials; complete the prompts.
Print a network setup page and confirm the connection before adding the printer in Windows.

Repeat the original operation and confirm the problem no longer occurs.

Use the exact model support page; record the full displayed message.

Do not assume that a touchscreen MB model uses the same control-panel navigation.

These links identify the source and its scope. Check the manufacturer page again before changing a printer setting or buying a part.

Confirm the exact model before following a model-specific sequence.

Choose the symptom and connection method.

Found a mismatch? Request a correction with the public source URL and exact model, without passwords or full serial numbers.