Epson ET3850: print a network connection report

Epson ET3850: print a network connection report. Check the exact model and use these steps only where the stated requirements apply.

Before you begin

Applies to: Epson ET-3850. Only the listed models; do not expand by similarity.

Confirm the exact model and current printer status before changing settings.

Home > Settings > General Settings > Network Settings > Connection Check.
Select Print Check Report and start printing.
Read the failure item, E-number and network details locally; use the matching network-report entry.
After correcting the setting, run the check again and then test from the computer.

Repeat the original operation and confirm the problem no longer occurs.

Use the exact model support page; record the full displayed message.

Reports can contain SSIDs, IP addresses and device identifiers. Redact sensitive details before sharing them publicly.

These links identify the source and its scope. Check the manufacturer page again before changing a printer setting or buying a part.

Confirm the exact model before following a model-specific sequence.

Choose the symptom and connection method.

Found a mismatch? Request a correction with the public source URL and exact model, without passwords or full serial numbers.