Canon PIXMA TR4720/TR4722: manual SSID and password setup

Canon PIXMA TR4720/TR4722: manual SSID and password setup. Check the exact model and use these steps only where the stated requirements apply.

Before you begin

Applies to: Canon PIXMA TR4720, Canon PIXMA TR4722. Only the listed models; do not expand by similarity.

Confirm the exact model and current printer status before changing settings.

In the printer Wi-Fi setup menu, select Manual connect and confirm with OK.
Select your router SSID and press OK. If it is absent, check network visibility and the supported connection conditions in the manual.
Enter the password exactly, including letter case, and confirm with OK.
After the connected message, press OK and return to COPY as the tutorial directs.
Return to the computer installer, finish adding the printer, and print a test page.

Repeat the original operation and confirm the problem no longer occurs.

Use the exact model support page; record the full displayed message.

Never substitute a network reset for checking an incorrect password. Wireless Direct is a different connection mode.

These links identify the source and its scope. Check the manufacturer page again before changing a printer setting or buying a part.

Confirm the exact model before following a model-specific sequence.

Choose the symptom and connection method.

Found a mismatch? Request a correction with the public source URL and exact model, without passwords or full serial numbers.